• Industry’s lowest jitter:
– 9.3fs typical differential RMS jitter at 625MHz
HS-LVDS with 4MHz 1st order high-pass filter
(12kHz to 20MHz)
– 19.7fs typical differential RMS jitter at
312.5MHz AC-LVPECL with 4MHz 1st order
high-pass filter (12kHz to 20MHz)
– 16fs typical RMS jitter at 2500MHz AC-LVPECL
output (12kHz to 20MHz)
– 18fs typical, 35fs max RMS jitter at 625MHz
AC-LVPECL output (12kHz to 20MHz)
– 28fs typical RMS jitter at 312.5MHz AC
LVPECL output (12kHz to 20MHz)
• Exceptional PSRR performance (ripple
frequencies > 10kHz, 50mV supply ripple, 0.1μF
decoupling capacitor):
– < -95dBc spurs for 156.25MHz LP-HCSL
– < -80dBc spurs for 312.5MHz LVDS
• Output frequency:
– Initial frequency offerings: 100, 125, 156.25,
312.5, 625, 1250, 2500MHz, and others
– Preview, contact TI: 322.265625, 390.625,
425, 496, 603.2291, 804.305467, 2343.75,
2400, 2412.91636, 2457.6, 2480, 2550,
2578.125MHz
• Other fixed frequencies on request
• Supports PCIe Gen 1 to Gen 7
• Output formats:
– LVDS, HS-LVDS,AC-LVPECL, Custom Swing:
50MHz to 2500MHz
– LP-HCSL: 50MHz to 625MHz
• ±25ppm total frequency stability (inclusive of
all factors with 10-year aging at 25°C board
temperature)
– ±7ppm temperature variation (-40°C to 105°C)
• Preview, contact TI: ±20ppm total frequency
stability (inclusive of all factors with 10-year aging
at 85°C board temperature)
• 91mA maximum current consumption (AC
LVPECL, Custom Swing, LVDS, HS-LVDS)
• 85mA maximum current consumption (LP-HCSL)
• 2.5V / 3 .3V power supply (2 .375V through 3.465V)
• Industry standard 6-pin package:
– 2.0mm × 1.6mm (wettable flank)
– Preview, contact TI: 2.5mm × 2.0mm, 3.2mm ×
2.5mm
• -40°C to 105°C PCB temperature