SMD CRYSTAL UNIT SPECIFICATIONS
| Customer | |
| Customer P/N | |
| Product | - |
| Nominal Frequency | - |
| HOSONIC P/N | - |
| Version | 26W0 |
| Issue Date | --/--/-- |
| HOSONIC | ||
| Drawn | Checked | Approved |
Approved By Customer :
POP_UP_MESSAGE_CONTENT
| Customer | |
| Customer P/N | |
| Product | - |
| Nominal Frequency | - |
| HOSONIC P/N | - |
| Version | 26W0 |
| Issue Date | --/--/-- |
| HOSONIC | ||
| Drawn | Checked | Approved |
| Revised Record | ||||
|---|---|---|---|---|
| Rev. | Rev. Date | Item | Content | Remark |
| 1.0 | --/--/-- | Initial released | ||
| No. | Item | Symb. | Electrical Specification | Remark | |||
|---|---|---|---|---|---|---|---|
| Min. | Typ. | Max. | Units | ||||
| 1 | Nominal Frequency | F0 | - | MHz | |||
| 2 | Mode of Vibration | - | |||||
| 3 | Frequency Tolerance | Δ F/F0 | - | - | - | ppm | At 25℃±3℃ |
| 4 | Operating Temperature Range | TOPR | - | - | - | ℃ | |
| 5 | Frequency Stability | TC | - | - | - | ppm | Ref. to 25℃ |
| 6 | Storage Temperature | TSTG | - | - | - | ℃ | |
| 7 | Load capacitance | CL | - | - | - | pF | |
| 8 | Equivalent Series Resistance | ESR | - | - | - | Ω | |
| 9 | Drive Level | DL | - | - | - | μW | |
| 10 | Insulation Resistance | IR | - | - | - | MΩ | At 100VDC |
| 11 | Shunt Capacitance | C0 | - | - | - | pF | |
| 13 | Package type | - | |||||
| NO. | Part | Material | Remark |
|---|---|---|---|
| 1 | LID | KOVAR(Fe+Co+Ni alloy) | |
| 2 | PKG | Al2O3 | Base |
| 3 | Blank | SiO2 | Quartz |
| 4 | Adhesive paste | Ag/Silicon | Support |
| 5 | Electrode | Noble metal |
| Profiles Feature | Pb-Free Assembly |
|---|---|
| Average Ramp-up Rate (Ts max to Tp) | 3℃/second max. |
| Preheat .Temperature Min(Ts min) .Temperature Max (Ts max) .Time (ts min to ts max) | 125℃ 200℃ 60~180 seconds |
| Time maintained above . Temperature (TL) . Time (tL) | 217℃ 60~150 seconds |
| Peak/Classification Temperature (Tp) | 260℃ |
| Time within 5℃ of actual Peak Temperature (tP) | 20~40 seconds |
| Ramp-down rate | 6℃/second max. |
| Time 25℃to Peak Temperature | 8 minutes max. |
| Suggest reflow times | 3 Times max |
Tape Dimensions(unit : mm)
| A | B | C | D | E | F | L1 | W | t |
|---|---|---|---|---|---|---|---|---|
| 1.50 | 4.0 | 4.0 | 3.5 | 8.0 | 1.0 | 3.4 | 2.7 | 0.3 |
Reel Dimensions(unit: mm)
| G | H | I | J | K | L | M |
|---|---|---|---|---|---|---|
| 2.5 | 13.5 | 21.6 | 60.0 | 178 | 9.5 | 1.6 |
Carton Dimension (unit : mm)
| No. | Test Item | Test Conditions | Reference |
|---|---|---|---|
| 1 | High Temperature Storage | Temperature: 125℃±5℃ Time: 1000±12 Hours | MIL-STD-883E-1016 |
| 2 | Temperature Cycle | Temperature 1: -55℃±5℃ Temperature 2: 125℃±5℃ Temperature change between T1 and T2 at soonest Run 1000 cycles, maintain T1 and T2 5minutes each in one cycle | JESD22 Method JA-104 |
| 3 | Solder Heat Resistance | Pre-heat: 125℃ 60~120 Seconds Solder Temperature: 260℃±5℃ Time: 30 Seconds | MIL-STD-202F 210 E |
| 4 | Drop Test | 3 Times Free Fall from 75cm height table to 3cm thickness hard wood board | MIL-STD-202F-203B |
| 5 | High Temperature, High Humidity Storage | Temperature: 85℃±5℃ Relative Humidity: 80%--85% Time: 250Hours±24Hours | MIL-STD-202F-103B |
| 6 | Steam Aging | Temperature: 97℃±5℃ Time: 24 Hours 260℃solder pot to check solderability | MIL-STD-883 C-2B |
| 7 | Solderability | Dip in flux 5~10 seconds Temperature: 245℃±5℃ Time: 10 Seconds | MIL-STD-202F-208H |
| 8 | Aging | Temperature: 85℃±5℃ Time: 250±12Hours | MIL-STD-202 F-108A |
| 9 | Thermal Shock | Temperature 1: -55℃±5℃ Temperature 2: 125℃±5℃ Temperature change between T1 and T2: 5 seconds 100 cycles, maintain T1 and T2 for 30 minutes each in one cycle | MIL-STD-883E-1011.9B |
| 10 | Vibration | Frequency Range: 10Hz~2000Hz Amplitude: 1.5mm or 20G 4Hours in each direction, total 12Hours | MIL-STD-202F-204D |